Datalogic-scanning C-BOX 200 Manual de usuario descargar pdf (Pagina 13)

INSTALLATION

C-BOX 200 can be installed to operate in different positions. The two screw holes

inside the housing of the C-BOX 200 are for mechanical fixture (Figure 4).

To mount the C-BOX 200:

1) Open the C-BOX 200 by unscrewing the 4 cover screws. If necessary, using the

two mounting holes inside the device as a pattern, mark the panel with an

appropriate object and then drill two holes in the panel.

2) Align the C-BOX 200 and insert two screws and screw them into the panel until

tight (see Figure 4).

Figure 4 - Mounting C-BOX 200

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Sin comentarios

Datalogic-scanning C-BOX 200 Manual de usuario Pagina 13