Datalogic-scanning C-BOX 300 Manual de usuario descargar pdf (Pagina 17)

INSTALLATION

C-BOX 3X0 can be installed to operate in different positions. The two screw holes

inside the housing of the C-BOX 3X0 are for mechanical fixture (Figure 4).

To mount the C-BOX 3X0:

1) Open the C-BOX 3X0 by unscrewing the 4 cover screws. If necessary, using the

two mounting holes inside the device as a pattern, mark the panel with an

appropriate object and then drill two holes in the panel.

2) Align the C-BOX 3X0 and insert two screws and screw them into the panel until

tight (see Figure 4).

Figure 4 - Mounting C-BOX 3X0

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Sin comentarios

Datalogic-scanning C-BOX 300 Manual de usuario Pagina 17