Datalogic-scanning DL Cordless Card DLCC Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 55
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
PARAMETER ISSUES AND DEFINITIONS
4
Case 2 – DLCC as Client (like an RF device)
HOST
Client
Figure 6 - DLCC Client
In the figure above, DLCC is a Client (as an RF device). The following parameters
may be set depending on the application:
STAR
Modem™ - ACK/NACK = enabled
STAR-System™ - Rx / Tx = enabled
If DLCC - Transmission Mode = 1 way
ACK/NACK from Remote Host = disabled
FIFO = disabled
Handshaking = modem (RTS/CTS)
In this case, DLCC sends data (messages) to the Remote Host. The special
case of FIFO disabled blocks transmission until an acknowledgement is received
from Host. Because ACK/NACK is enabled for STAR
Modem™, only after this
has received an ACK from the Remote Host does it acknowledge reception
(Empty Answer to DLCC).
17
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Comentarios a estos manuales

Sin comentarios